New Conveyor Belts | Conveyor Belt Splicing | Conveyor Belt Repairs & Reconditioning | Belt Jointing Materials | Conveyor Products
 
Conveyor Products
 
Impact Pads
 

Waidhan Impact Pads are designed for loading points of Conveyor Belts, where a combination of high energy absorption and low friction is needed. Due to ease of installation, these Impact Pads replace the conveyor rollers, which eventually break or seize and act like a brake. Further, Impact Pads provide greater belt support area thereby increasing impact absorption and reducing impact on the belt.

The top cover is made of an UHMW-PE (Ultra High Molecular Weight Polyethylene), which gives these Impact Pads a very low friction and high wear resistant top surface. The middle portion is of a high quality rubber having high resilience, which acts as a shock absorber at the loading zones of conveyors. These Impact Pads are manufactured with an Aluminium T Track fixing system for easy installation.
The Impact Bars come in standard lengths of 1220mm, with 10mm or 12mm top cover of UHMWPE.

 
   
   
   
Impact Bar Sizes
050 100 1220
075 100 1220
100 100 1220
 
 
Support Frame:
 

Support frames are designed to suit a wide range of applications for impact pad. The heavy duty sturdy pads are fixed over an equally robust heavy duty bolted type adjustable support frame to absorb high impact load.

 
 
Rows of Pad Required at Each Loading Point
Belt width (mm) 600/650 750/800 1000 1200 1400 1600 1800 2000 2200 2400
No. of rows 6 7 9 10 12 14 15 17 19 20
 
 
Wear Bars:
 

Waidhan Wear bars (Also known as lifter Bars) and used for grinding mills as stock items. These Bars comprises of Aluminium T Bolt profile and Wear Resistant rubber. The aluminium profile vulcanized into the bar allows for fast and easy installation due to the T-bolt fastening system.

Wear Bars are excellent wear lining to; Washing drums, rock boxes, feed cones-crushers and other applications subjected to wear and noise.

The standard length available is 1220mm, in thicknesses ranging from 75mm to 150mm.

 
 
 

Ball Mill with Rubber Liner
Wear Bar Sizes
Thickness Width X Length
75 mm 100 1220 mm
125 1220 mm
150 1220 mm
100 mm 100 1220 mm
125 1220 mm
150 1220 mm
125 mm 100 1220 mm
125 1220 mm
150 1220 mm
150 mm 125 1220 mm
150 1220 mm
 
High Wear Resistant Ceramic Liners
 

Waidhan Wear Resistant Ceramic Liners is made of High Alumina content cylindrical rods moulded in highly impact resistant rubber. These comprise of Wear resistant ceramic Tiles along with resilient rubber effectively dampening the impact forces and provide unsurpassed resistance to abrasive wear. These liners are steel backed. Used in heavy wear areas characterized by both impact & abrasion with small angle of impact where cost to life ratio is more important than low initial cost.

These are typically used at Transfer points in conveyor systems, Screen chutes and Deflectors / Feeders.


Plate size:- 500 mm X 500 mm, All plates are 25 mm. thk.

 
Copyright 2006-2012 Waidhan Engineering & Industries Pvt. Ltd.. All rights reserved.